Ideal-Air Pro Series Ultra Sonic Humidifier 300 Pint

Ideal-Air™ Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant’s entire canopy. The Ideal-Air™ Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display & humidity control (30% – 90%). This unit is designed to produce up to 300 pints per day of ultra-fine mist. 115V, 60Hz & 5.2 amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The units should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

PRO TIP: Consider using an RO system along with a DI (De-Ionization) post filter to produce the water used to supply your humidifier. Tap water is high in salts (PPM’s), and RO water is typically 20-60 PPM. Even a small amount of dissolved solids in your humidifier water can eventually lead to a white salt buildup that accumulates on the humidifier and the surrounding area, including your plants, the walls, grow room equipment, and worst of all, air conditioner and dehumidifier pre-filters.